2011 Publications

Robinson, C.,  ‘Developing a Non-Newtonian Flow Model in Flowmaster’, Flowmaster User Symposium, 2011

American Wind Energy Association (AWEA) and American Society of Civil Engineers (ASCE) with contributions by Prowell, I. and numerous other authors. Recommended Practice for Compliance of Large Land-based Wind Turbine Support Structures, electronic 89 p., December, 2011.

Peterson, E., Reed, M., Sheth, C., CFD to Model a Time Varying LNG Spill: 2011 International Symposium Proceedings, Making Safety Second Nature, Mary Kay O’Connor Process Center, College Station, TX, Oct 24-26, 2011.

Peterson, E., Reed, M., Sheth, C., Nodland., “Atmospheric Dispersion Using Commercially Available CFD Software”: Atmospheric Chemistry and Physics I, Environmental Division, AIChE 2011 Annual Meeting, Minneapolis, MN Oct 16-21, 2011.

Moreno, H., Romero, A., Gomes, J.A., Parga, J.R., Peterson, E., Garcia, C., Campa, P., “Municipal Wastewater Treatment Using Electrocoagulation and Adsorption for Reuse In Industrial Processes and Green Areas”: Water Reuse and Hybrid Water Treatment Processes, Separations Division, AIChE 2011 Annual Meeting, Minneapolis ,MN Oct 16-21, 2011.

Burt, D.J., Foster, D. (Thames Water), Grand, A., Ganeshalingam, J., “Modelling The Full Dynamic Response of a New Waste Water Clarifier to Storm Flows,” 5th European Water & Wastewater Management Conference, Barbican London, September, 2011.

Asareh, M.A., I, Prowell., “Seismic Loading for FAST,” National Renewable Energy Laboratory, NREL/SR-5000-53872, Golden, Colorado, USA, August, 2011.

Winterstein, S.R., Stanford Continuing Studies, Stanford, C.A., Haver, S., Statoil, Stavanger, Norway, Jha A.K., MMI Engineering, Oakland, CA, ‘TURKSTRA PROFILES OF NORTH SEA CURRENTS: WIDER THAN YOU’D THINK’, Proceedings of the 30th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2011, June 19–24, 2011, Rotterdam, Netherlands.http://dx.doi.org/10.1115/OMAE2011-49866

Gupta, S., Sanderson, D., Stacey, A., “Critically Rating of Ageing Fixed Offshore Structures”, OMAE2011-49091, International Conference on Ocean, Offshore and Arctic Engineering OMAE2011 June 2011, Rotterdam, The Netherlands.

Shoele, K., Prowell, I., Elgamal, A., Zhu, Q., “Dynamic and Structural Modeling of a Floating Wind Turbine.” International Journal of Offshore and Polar Engineering, Vol. 21, Issue 2, pp. 155-160, June, 2011.

Graf, W.P., Hope, A., Seligson, K.I., “Earthquake Damage to Wood-Framed Buildings in the ShakeOut Scenario”, Earthquake Spectra,Volume 27, pages 351–373, May, 2011.

Porter, K., Jones, L., Cox, D., Goltz, J., Hudnut, K., Mileti, D., Perry, S., Ponti, D., Reichle, M., Rose, A.Z., Scawthorn, C.R., Seligson, H.A., Shoaf, K.I., Treiman, J., Wein, A., “The ShakeOut Scenario: A Hypothetical M_w7.8 Earthquake on the Southern San Andreas Fault”,Earthquake Spectra, Volume27, No. 2, pages 239–261, May, 2011.

Shoaf, K.I., Seligson, H.A., “Estimating Casualties for the Southern California ShakeOut”, in Human Casualties in Earthquakes:  Progress in Modelling and Mitigation, R. Spence, E.So and C. Scawthorn, eds., Advances in Natural and Technological Hazards Research, Volume 29, Springer Netherlands.

Prowell, I., “An Experimental and Numerical Study of Wind Turbine Seismic Behavior”, Ph.D. Thesis, University of California, San Diego, April, 2011.

Peterson, E., Sheth, C., Nodland, S., White, J., “Jet Fire Protection-Where Risk Based CFD Analysis Pays Off: Topical 1”, Lessons Learned from Facility Siting Studies, AIChE Spring 2011 Meeting-7th Global Congress on Process Safety, 83a, 2011.

Peterson, E., Gomes, J.A., Cocke, D.L., Moreno, H., Reed, M., Hutchins, J.W., Atambo, D., Das, K.K., “Challenges and Opportunities of Electrocoagulation for Refinery Application”: Case Study with Chicken Processing Plant Water and Fleet Wash Water:Environmental and Water Solutions, Topical 7: 14th Topical on Refinery Processing, AIChE Spring 2011 Meeting-7th Global Congress on Process Safety, 89e, 2011.

Prowell, I., Schmidt, T., Elgamal, A., Uang, C.-M., Romanowitz, H., Duggan, J.E., “Measuring Global Response of a Wind Turbine to Simulated Earthquake Shaking Assisted by Point Tracking Videogrammetry.” Proceedings of the 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, American Institute of Aerospace and Astronautics, Reston, Virginia, USA, April, 2011.

Prowell, I., Elgamal, A., Uang, C.-M., Luco, J.E., Conte, J., “Recent Advances in Understanding the Seismic Response of Wind Turbines.”Proceedings of 2011 NSF Engineering Research and Innovation Conference, Atlanta, Georgia, USA, January, 2011.

Nolan, D., ‘Comparative Study of Offshore Wind Turbine Generators (OWTG) Standards’:  Technical Assessment & Research (TA&R) Program January, 2011

American Society of Civil Engineers, “Wind Loads for Petrochemical and Other Industrial Facilities”, Second Edition, Summers, P.B., Li, G.,Contributors to the Task Committee on Wind-Induced Forces, Reston, Virginia, 2011.

Jones, T., “An Improved Ray Casting Tool for Flame Detection Analysis, FABIG Technical Newsletter 56.

Jones, T., “New Developments in the Assessment & Design of Flame Detector Layouts”.  Hazards XXII, 2011.